White Stereo Cabinets With Glass Doors - For measuring your face frame cabinets for new cupboard doors, step by step directions. Most cupboard companies want you to give them the real door dimensions rather than the tough openings. Openings will be the real measurements of the rectangular holes in your cabinets which you want to cover with cupboard doors. You'll need to take these measurements and change them to do or dimensions before you buy.
Check your cupboard openings when they are square to determine. That is easily achieved by measuring diagonally from corner to corner both methods. Your opening is square, when the measurements will be the same. Same thing goes for the height, measure height on the left and right sides and take the larger of the two. You have the tough opening measurements.
Now that you have the tough opening measurements, what do you do together? You have to make a choice. Keep in mind how extensive are the designs between openings? They will both require clearance to swing-open without hitting the do-or, even if this door is open at the same time, if two doors are side by side and hinge to hinge. The a mount of clearance is mainly a function of which hinge you might be using.
Check along with your hinge manufacturer to find out just how much you really need. Most hinges will need anywhere from zero clearance up to a quarter of an inch. You are going to need to observe just how much clearance there is between the top of your countertop or drawer fronts as well as the opening. Check the bottom for absolutely any decorative moldings that may hit the bottom of your doors and alter appropriately.