Custom Leaded Glass Cabinet Doors - For measuring your-face frame cabinets for cupboard doors that are new, step by step instructions. Most cupboard organizations want one to give the actual door dimensions rather than the tough openings to them. Openings would be the actual measurements of the rectangular holes in your cabinets that you want to cover with cupboard doors. You may need to take these measurements and change them to door sizes before you buy.
Check your cupboard openings whether they are square to see. Then your opening is square when the measurements would be the same. Then take the larger of the two and you will want to measure the width at the top and bottom when they're not. Same thing goes for the height, measure height on the left and right sides and take the larger of both. You have the tough opening measurements.
Since you've the tough opening measurements, what do you do with them? You need to make a choice. Keep in mind how wide are the designs between openings? Stiles are the vertical strips covering the edges of the cabinet box. They'll both require clearance to swing open without hitting the door, even if that door is open too, if two-doors are side by side and hinge to hinge. The sum of clearance is primarily a function that hinge you might be using.
Check with your manufacturer to locate out how much you really need. Most hinges will need anyplace from zero clearance up to a quarter of an inch. You may also need to see how much clearance there is between the very best of your counter-top or drawer fronts as well as the opening. Check the bottom for absolutely any decorative moldings that might hit the bottom of your doorways and adjust accordingly.