Child Proof Sliding Cabinet Doors - For measuring your-face frame cabinets for cupboard doors that are new, step by step instructions. Most cupboard organizations want one to give the real door measurements rather than the rough openings to them. Openings are the real measurements of the holes in your cupboards that you want to protect with cupboard doors. You may need to consider these measurements before you purchase, and convert them to do or sizes.
Check your cupboard openings to find out if they are square. This is easily accomplished by measuring diagonally from corner to corner both ways. When the measurements are the same, your opening is square. If they aren't, then consider the larger of the two and you you will need to calculate the width at the top and bottom. Same thing goes for the peak, measure peak on the right and left sides and consider the larger of the two. You have the rough opening measurements.
Now that you have the rough opening measurements, what would you do with them? You must create a choice. Keep in mind how extensive are the designs between openings? They will both need clearance to swing open without hitting the do-or, even if that door is open at the same time if two-doors are side by side and hinge to hinge. The amount of clearance is mostly a perform which hinge you are using.
Check with your manufacturer to find out just how much you need. Hinges will need anywhere from zero clearance around a quarter of an inch. Check the bottom for any moldings that may hit the bottom of your doors and change appropriately.