Kitchen Cabinet Door Slow Closers - Step by step directions for measuring your face frame cabinets for new cabinet doors. Most cabinet companies want you to give them the actual door sizes rather than the tough openings. Openings will be the actual measurements of the holes that are rectangular in your cabinets that you want to protect with cabinet doors. You may need to consider these measurements and change them to do or dimensions before you buy.
Check your cabinet openings to see if they are square. Then your opening is square, if the measurements will be the same. Then consider the bigger of the two and you you will need to measure the width at the top and bottom when they aren't. Same thing goes for the height, measure height on the left and right sides and consider the bigger of the two. You have the tough opening measurements.
Since you've the tough opening measurements, what does one do together? You have to produce a decision. Just how many overlays would you want to have on your face frame cabinets? Keep in mind how extensive are the types between openings? They'll both need clearance to swing-open without hitting the other do-or, even if this door is open too if two doors are side by side and hinge to hinge. The amount of clearance is mostly a perform of which hinge you might be using.
Check together with your hinge manufacturer to find out how much you really need. Most hinges will need anyplace from zero clearance as much as a quarter of an inch. You are going to need to observe how much clearance there is between the very top of your counter-top or drawer fronts and the opening. Check the bottom for any decorative moldings that may hit the bottom of your doors and alter appropriately.