Wooden Storage Cabinets With Sliding Doors - Step by step instructions for measuring your face frame cabinets for cabinet doors that are new. Most cabinet companies want you to give them the real door sizes as opposed to the tough openings. Openings are the real measurements of the holes that are rectangular in your cupboards that you want to protect with cabinet doors. You'll need to take these measurements before you order and transform them to door sizes.
Check your cabinet openings if they're square to determine. If the measurements are the same, in that case your opening is square. Then take the greater of the two and you you will need to measure the width at the top and bottom when they're not. Same thing goes for the height, measure height on the right and left sides and take the greater of the two. You have the tough opening measurements.
Given that you have the tough opening measurements, what do you do together? You need to create a decision. Keep in mind how broad are the styles between openings? They'll both need clearance to swing-open without hitting the door, even if that door is open as well, if two doors are side by side and hinge to hinge. The a mount of clearance is mainly a function that hinge you are using.
Check along with your manufacturer to locate out how much you need. Hinges will need anyplace from zero clearance around a quarter of an inch. Check the bottom for any decorative moldings which may hit the bottom of your doors and alter appropriately.