Kitchen Cabinet Doors Only - Step by step instructions for measuring your-face frame cabinets for new cabinet doors. Most cabinet organizations want one to give the real door dimensions rather than the rough openings to them. Openings are the real measurements of the holes that are rectangular in your cabinets that you just want to cover with cabinet doors. You will need to consider these measurements before you order, and convert them to door sizes.
Check your cabinet openings whether they're square to see. In that case your opening is square, if the measurements are the same. Same thing goes for the height, measure height on the right and left sides and consider the larger of the two. You have the rough opening measurements.
Now that you have the rough opening measurements, what can you do with them? You have to make a choice. Just how many overlays would you want to have on your face frame cabinets? Keep in mind how broad are the types between openings? Stiles are the strips covering the edges of the cabinet box. They'll both require clearance to swing open without hitting the do-or, even if that door is open too if two doors are side by side and hinge to hinge. The amount of clearance is mainly a function that hinge you might be using.
Check together with your hinge manufacturer to find out just how much you need. Hinges will need anywhere from zero clearance around a quarter of an inch. You'll also need to observe just how much clearance there is between the most effective of your counter-top or drawer fronts and the opening. Check the bottom for any decorative moldings that may hit the bottom of your doors and alter appropriately.